Title | Description | Download | Size |
---|---|---|---|
ama3evb_fast_gpio_example | This is an example project for Ambiq Micro Apollo3Blue at AMA3BEVB of Ambiq Micro, blinking LED LD5 with 25MHz
using Aollo3Blue FAST-GPIO.
[ more... ] | ama3bevb_fa[...]-v11.zip | 1.41MB |
ama3bevb_ctimer_ext_counter | This is an example project for Ambiq Micro Apollo3Blue, demonstrating the use of the
Counter/Timer module connecting several timers together and using a button as clock input.
Generates 10 pulses wi... [ more... ] | ama3bevb_ct[...]-v11.zip | 1.35MB |
ama3bevb_gpio_example | This is an example project for Ambiq Micro Apollo3Blue at AMA3BEVB of Ambiq Micro, blinking LEDs LD5-9.
While button BTN2 is pressed, blinking stopps.
Pressing BTN3 sets lower blinking speed.
Press... [ more... ] | ama3bevb_gp[...]-v11.zip | 1.33MB |
ama3bevb_gpio_irq_example | This is an example project for Ambiq Micro Apollo3Blue at AMA3BEVB of Ambiq Micro, blinking LEDs LD5-9.
BTN2 is toggling blinking LEDs
Pressing BTN3 sets lower blinking speed.
Pressing BTN4 sets hi... [ more... ] | ama3bevb_gp[...]-v11.zip | 1.34MB |
ama3bevb_pwm_example | This is an example project for Ambiq Micro Apollo3Blue, demonstrating the use of the
Counter/Timer module with PWM and an interrupt service routine to update the duty
cycle. The Counter/Timer module... [ more... ] | ama3bevb_pw[...]-v11.zip | 1.37MB |
ama3bevb_uart_example | This is an example project for Ambiq Micro Apollo3Blue demonstrating the use of the UART
with 115200,8,N,1 setting. UARTTX on GPIO22 and UARTRX on GPIO23.
A serial terminal program can be used to re... [ more... ] | ama3bevb_ua[...]-v11.zip | 1.35MB |
apollo3-adc_irq_ctimer | Use ADC to read 14-bit ADC value at PAD 13 using interrupts
and CTIMER A3 for generating triggers for ADC scan
[ more... ] | apollo3-adc[...]-v11.zip | 1.20MB |
apollo3-adc_irq | Use ADC to read 14-bit ADC value at PAD 13 using interrupts
[ more... ] | apollo3-adc[...]-v11.zip | 1.19MB |
apollo3-adc | Use ADC to read 14-bit ADC value at PAD 13
[ more... ] | apollo3-adc-v11.zip | 1.19MB |
apollo3-clkgen | Example how to clock-out one of the different clock-sources with or without divider.
This example generates 48MHz divided by 4 (=12MHz) at PAD7.
[ more... ] | apollo3-clk[...]-v11.zip | 1.18MB |
apollo3-ctimer_pattern_generation | This example for Apollo3Blue generates a 64-bit pre-defined pattern at GPIO 12
in hardware only by use of the CTIMER pattern generator feature
[ more... ] | apollo3-cti[...]-v11.zip | 1.19MB |
apollo3-ctimer_pattern_i2s_sgtl5000 | This example demonstrates with use of STGL5000 how to generate
I2S audio-output by use of two timer with one timer configured as pattern generator.
Connection:
STGL5000 <-> Apollo3Blu... [ more... ] | apollo3-cti[...]-v12.zip | 3.10MB |
apollo3-iom_i2c_direct_cmd | Example for using Apollo3s IOM as I2C in direct command mode
Pin-Configuration:
- pin 8, M0SCK
- pin 9, M0SDA
[ more... ] | apollo3-iom[...]-v11.zip | 1.22MB |
apollo3-iom_i2c_dma | Example for using Apollo3s IOM as I2C in DMA mode
Pin-Configuration:
- pin 8, M0SCK
- pin 9, M0SDA
[ more... ] | apollo3-iom[...]-v11.zip | 1.22MB |
apollo3-iom_spi_direct_cmd | Example for using Apollo3s IOM as SPI in direct command mode
Pin-Configuration:
- pin 5, M0SCK
- pin 6, M0MISO
- pin 7, M0MOSI
- pin 42, M0nCE0
pin 6 and 7 are connected by jumper-cable to loopb... [ more... ] | apollo3-iom[...]-v11.zip | 1.17MB |
apollo3-iom_spi_dma | Example for using Apollo3s IOM as SPI in DMA mode
Pin-Configuration:
- pin 5, M0SCK
- pin 6, M0MISO
- pin 7, M0MOSI
- pin 42, M0nCE0
pin 6 and 7 are connected by jumper-cable to loopback data
[ more... ] | apollo3-iom[...]-v11.zip | 1.22MB |
apollo3-rtc | Basic RTC example to set / get time
[ more... ] | apollo3-rtc-v11.zip | 1.17MB |
apollo3-stimer | This example using the STIMER to blink 3 LEDs at AMA3BEVB.
Every LED is triggered by a different STIMER channel,
so every LED is like a task managed in hardware.
while the STIMER is still running
... [ more... ] | apollo3-sti[...]-v11.zip | 1.20MB |
apollo3-wdt | This example demonstrates the watchdog peripheral with use of AMA3BEVBs LEDs.
In normal operation, the application is executing a binary counter updated every 500ms.
After 5 seconds an application ... [ more... ] | apollo3-wdt-v11.zip | 1.18MB |
apollo3blue_template | This is a project template. It includes some
basic settings for e.g. Linker, C-Compiler.
[ more... ] | apollo3blue[...]-v11.zip | 1.15MB |